Online Tower UPS 1–10 kVA
True online double-conversion VFI UPS delivering pure sine-wave output and 0 ms transfer time for servers, networking, telecom, security systems, edge IT and professional equipment. Wide operating input voltage range of 110–300 Vac (1–3 kVA) and 110–286 Vac (6–10 kVA) helps maintain stable output and reduce unnecessary battery operation.
Internal-battery and long-runtime configurations are available by model, with compatible external battery cabinets for extended backup. Designed and tested in accordance with applicable CE, EMC, LVD and IEC 62040 requirements.
Engineered for Reliable Power Protection
Online double-conversion protection with pure sine-wave output, flexible internal or external battery configurations, and parallel capability on selected 6–10 kVA models. TM11E is designed for servers, networking, telecom, security systems, edge IT and professional equipment.
True Online Double-Conversion
VFI topology with DSP digital control provides regulated pure sine-wave output and 0 ms transfer time. It protects connected equipment from voltage fluctuations, frequency variations, outages and other common power disturbances.
High Input Power Factor
Active power-factor correction provides input PF of up to 0.99 by model and load level, helping reduce input current demand and upstream electrical loading. Wide input operating tolerance also supports better coordination with utility and generator sources.
High Operating Efficiency
Online-mode efficiency reaches up to 91% on 1–3 kVA models and up to 93.5% on 6–10 kVA models. ECO-mode efficiency reaches up to 98% by model, helping reduce energy consumption where utility quality permits ECO operation.
Flexible Battery Runtime
Internal-battery and long-runtime versions are available by model. Compatible TC-series external battery cabinets can extend backup time based on the UPS configuration, connected load and required runtime.
Parallel Capability – Selected 6–10 kVA Models
Selected 6–10 kVA models support parallel operation of up to four units for capacity expansion or N+X redundancy, subject to the selected UPS version, parallel accessories and project design.
Communication and Monitoring
Local status and control are provided through LCD or LED interfaces depending on model. USB, RS-232, EPO and intelligent-slot communication are available by configuration, with optional SNMP, relay and RS-485 monitoring cards for network and control-room integration.
Expand Your System
Optional accessories for extended runtime, remote monitoring and maintenance support – selected according to the TM11E model and project configuration.
External Battery Cabinets
Compatible TC-series tower battery cabinets extend backup time for selected TM11E models. Battery quantity, cabinet type and capacity are sized according to the UPS model, connected load and required runtime.
TM220 SNMP Card
For selected 1–3 kVA models
Optional intelligent-slot card providing SNMP monitoring, web-based access and email notifications. Compatibility depends on the selected TM11E model and communication configuration.
TM550 SNMP Card
For selected 6–10 kVA models
Optional intelligent-slot card providing SNMP monitoring, web-based access and email notifications. Compatibility depends on the selected TM11E model and communication configuration.
External Maintenance Bypass PDU
Provides an external bypass path so the connected load can remain supplied during UPS service or replacement, subject to correct installation, utility availability and the prescribed switching procedure. Available by model and rating.
Technical Details
Complete specifications for the TM11E 1–10 kVA series.
1–3 kVA Models
| Specification | 1 kVA | 2 kVA | 3 kVA |
|---|---|---|---|
| Full Name | TM11E Tower Online UPS | ||
| Topology | Online Double-Conversion (VFI), Transformer-less | ||
| Phase | 1P–1P (Single Phase In / Single Phase Out) | ||
| Form Factor | Tower | ||
| Capacity | 1000 VA / 900W | 2000 VA / 1800W | 3000 VA / 2700W |
| Output Power Factor | 0.9 standard | ||
| kVA Range | 1–10 | ||
| Operating Modes | Online, ECO, Bypass, Battery | ||
| Standards | IEC/EN 62040-1, IEC/EN 62477-1, IEC/EN 62040-2 | ||
6–10 kVA Models
| Specification | 6 kVA | 10 kVA |
|---|---|---|
| Full Name | TM11E Tower Online UPS | |
| Topology | Online Double-Conversion (VFI), Transformer-less | |
| Phase | 1P–1P (Single Phase In / Single Phase Out) | |
| Form Factor | Tower | |
| Capacity | 6000 VA / 5400W | 10000 VA / 9000W |
| Output Power Factor | 0.9 standard (PF 1.0 available in TM11E Elite 6-10 kVA series) | |
| Operating Modes | Online, ECO, Bypass, Battery | |
| Parallel | Up to 4 units (optional parallel card) | |
| Standards | IEC/EN 62040-1, IEC/EN 62477-1, IEC/EN 62040-2 | |
1–3 kVA Models
| Specification | 1 kVA | 2 kVA | 3 kVA |
|---|---|---|---|
| Input Voltage Range | 110–300Vac (full load 176–264Vac) | ||
| Input PF | ≥0.99 (Active PFC) | ||
| Input Frequency | 40–70Hz Auto-sensing | ||
| Output Voltage | 208/220/230/240Vac selectable, ±1% regulation | ||
| Output PF | 0.9 standard | ||
| Output Frequency | 46–54Hz or 56–64Hz (line); 50/60Hz ±0.1Hz (battery) | ||
| THDv | ≤3% linear / ≤5% non-linear | ||
| Transfer Time | 0ms (AC→Battery); 4ms (Inverter→Bypass) | ||
| Crest Factor | 3:1 | ||
| Efficiency (AC Mode) | 88% | 90% | 91% |
| Efficiency (Battery) | 85% | 87% | 88% |
6–10 kVA Models
| Specification | 6 kVA | 10 kVA |
|---|---|---|
| Input Voltage Range | 110–286Vac | |
| Input PF | ≥0.99 (Active PFC) | |
| Input Frequency | 40–70Hz Auto-sensing | |
| Output Voltage | 208/220/230/240Vac selectable, ±1% regulation | |
| Output PF | 0.9 standard (PF 1.0 available in TM11E Elite 6-10 kVA series) | |
| THDv | ≤2% linear / ≤5% non-linear | |
| Transfer Time | 0ms (AC→Battery); 5ms (Inverter→Bypass) | |
| Crest Factor | 3:1 | |
| Efficiency (AC Mode) | Up to 93.5% | |
| Bypass Breaker | 40A | 63A |
1–3 kVA Battery
| Specification | 1 kVA | 2 kVA | 3 kVA |
|---|---|---|---|
| Battery Type | 12V 9Ah VRLA (ATN1209) | ||
| Chemistry | Sealed Lead-Acid, Maintenance-Free | ||
| Battery Count (standard) | 2 pcs (24Vdc) or 3 pcs (36Vdc) | 4 pcs (48Vdc) or 6 pcs (72Vdc) | 6 pcs (72Vdc) or 8 pcs (96Vdc) |
| DC Bus Voltage | 24Vdc / 36Vdc | 48Vdc / 72Vdc | 72Vdc / 96Vdc |
| Recharge Time | 4 hours to 90% | ||
| Charging Current | S-model: 1A / L-model: up to 12A | ||
| Battery Life | 3–5 years at 25°C | ||
6–10 kVA Battery
| Specification | 6 kVA | 10 kVA |
|---|---|---|
| Battery Type | 12V 9Ah VRLA (ATN1209) | |
| Chemistry | Sealed Lead-Acid, Maintenance-Free | |
| DC Bus Voltage | ±96 / ±108 / ±120Vdc (settable via LCD) | |
| Battery Count | 16 / 18 / 20 blocks (S-model: 16 internal at ±96Vdc) | |
| Recharge Time | 6–8 hours to 90% | |
| Charging Current | 1.35A default; adjustable up to 8A via LCD | |
| Battery Self-Test | Auto every 30 days (10s, 10min, or to EOD) | |
| Battery Life | 3–5 years at 25°C | |
Compatible Battery Cabinets
1–3 kVA – TC Series (Tower Cabinets)
| Model | Type | Capacity | Voltage | Dims (W×D×H) | Weight |
|---|---|---|---|---|---|
| TC04024C | Tower | 4 blocks | 24Vdc | 270×556×340mm | 13.5kg |
| TC06036C | Tower | 6 blocks | 36Vdc | 270×556×340mm | 18.5kg |
| TC08048C | Tower | 8 blocks | 48Vdc | 375×733×510mm | 28.5kg |
| TC12072C | Tower | 12 blocks | 72Vdc | 375×733×510mm | 38.5kg |
| TC16096C | Tower | 16 blocks | 96Vdc | 375×733×510mm | 47.5kg |
6–10 kVA – TC40120N (Tower Cabinet)
| Model | Type | Capacity | Voltage | Dims (W×D×H) | Weight |
|---|---|---|---|---|---|
| TC40120N | Tower (wheels) | 40 blocks | ±120Vdc | 250×619×616mm | ~134kg w/9Ah |
1–3 kVA Models
| Specification | 1 kVA | 2 kVA | 3 kVA |
|---|---|---|---|
| Form Factor | Tower | ||
| Dimensions – L/S (W×D×H) | 144×293×209mm (24V) 144×399×209mm (36V) | 191×460×337mm | 191×460×337mm |
| Weight (L / with battery) | 9.5kg / 12.5kg | 19kg / 24kg | 26kg |
| Weight (S / empty) | 4.5kg / 6kg | 10kg | 10kg |
| Noise | <50dB at 1m | ||
6–10 kVA Models
| Specification | 6 kVA | 10 kVA |
|---|---|---|
| Form Factor | Tower | |
| Dimensions – L head unit (W×D×H) | 191×460×337mm | |
| Dimensions – S with battery (W×D×H) | 191×460×720mm (with wheels) | |
| Weight (L head unit) | 12kg | 13.5kg |
| Weight (S with batteries) | ~69.5kg | ~71kg |
| Noise | <55dB at 1m | <58dB at 1m |
1–3 kVA Communication
| Interface | Details |
|---|---|
| USB | Type-B USB port for UPSilon2000 / KPower monitoring |
| RS-232 | DB9 serial (2400bps, 8N1) – cannot use with USB simultaneously |
| SNMP Card Slot | 1× intelligent slot – supports TM220 SNMP card |
| RJ45 Surge | Network/telephone surge protection pass-through |
| EPO | Emergency Power Off connector |
| Optional | Relay card (6 outputs + 1 input), external battery cabinets (TC series) |
6–10 kVA Communication
| Interface | Details |
|---|---|
| USB | Type-B USB port for UPSilon2000 / KPower monitoring |
| RS-232 | DB9 serial (2400bps, 8N1) – cannot use with USB simultaneously |
| RS-485 | Built-in for multi-drop / Modbus monitoring |
| SNMP Card Slot | 1× intelligent slot – supports TM550 SNMP card |
| EPO | Emergency Power Off connector |
| Parallel Ports | 2× parallel ports (requires optional parallel card, up to 4 units) |
| Maintenance Bypass | Built-in maintenance bypass switch |
| Optional | Parallel card, Relay card, TC40120N external battery cabinet |
1–3 kVA – Overload Capacity (Line Mode, <35°C)
| Load Level | Duration | Action |
|---|---|---|
| ≤110% | 60 minutes | Sustained |
| ≤125% | 10 minutes | Transfer to bypass |
| ≤150% | 1 minute | Transfer to bypass |
| >150% | Immediate | Transfer to bypass |
6–10 kVA – Overload Capacity (Line Mode)
| Load Level | Duration | Action |
|---|---|---|
| ≤105% | Continuous | Sustained |
| ≤125% | 10 minutes | Transfer to bypass |
| ≤130% | 30 seconds | Transfer to bypass |
| >130% | Immediate | Transfer to bypass |
Battery Mode (All Models)
| Load Level | Action |
|---|---|
| Any overload | Immediate shutdown |
| Parameter | Specification |
|---|---|
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | −25°C to 55°C |
| Humidity | 20–95% RH non-condensing |
| Altitude | <1500m full rated (derating above) |
| Safety Standards | IEC/EN 62040-1, IEC/EN 62477-1 |
| EMC Standards | IEC/EN 62040-2, IEC 61000 series |
| Leakage Current | Total UPS + loads must not exceed 3.5mA |
| Cooling | Forced air (fan) |
| Installation | Indoor use only |
Ideal For
Designed for servers, networking, telecom, security systems, office IT and selected professional equipment requiring online double-conversion protection, pure sine-wave output and flexible battery runtime.
Server Rooms & IT
Online double-conversion protection for servers, network switches, storage systems, firewalls and edge IT equipment in small and medium server environments.
Network & Telecom
Clean, regulated power for routers, switches, telecom equipment, access systems and network cabinets in server rooms, telecom shelters and edge sites.
Office & IT Infrastructure
Online UPS protection for workstations, small NAS systems, networking equipment, POS terminals and office peripherals requiring stable, continuous power.
Security & Surveillance
Online UPS backup for IP CCTV systems, NVRs, access-control panels, alarm systems and security-network equipment.
Healthcare & Laboratory IT
Online UPS protection for healthcare IT, monitoring systems, laboratory equipment and supporting electronics, subject to equipment load characteristics, electrical requirements and project approval.
Industrial Control & Automation
Stable online power for PLCs, SCADA workstations, industrial PCs, automation controllers and control-system equipment, subject to load profile, environmental conditions and project design.
Need More Usable kW, Rack Format or Three-Phase Power?
Compare TM11E with related ATENCO online UPS platforms – TM11E Elite for higher usable kW in tower format, RM11E for rack or rack/tower installations, and TM33E for three-phase systems from 10 to 40 kVA.
Online Tower UPS 6–10 kVA
- Online double-conversion VFI topology
- Output power factor 1.0 kW/kVA
- Online efficiency up to 95.5% by model
- Three-level inverter technology
- Dual intelligent slots available by model
- Higher usable kW capacity in tower format
Online Rack / Tower UPS 1–10 kVA
- Online double-conversion VFI with DSP control
- Rack/tower convertible design by model
- Output power factor up to 0.9 by model
- Wide input operating range
- Online efficiency up to 94% by model
- Internal-battery and long-runtime versions
Online Three-Phase UPS 10–40 kVA
- Online double-conversion VFI topology
- Three-phase input and three-phase output
- Output power factor 1.0 kW/kVA
- Online efficiency up to 94.5% by model
- ECO operation available
- Parallel up to four units, N+X by model
TM11E FAQ
Common questions about TM11E single-phase online tower UPS selection, battery runtime, parallel operation, monitoring and related ATENCO online UPS series.
What is the TM11E?
What is the difference between TM11E and TM11E Elite?
What is the difference between TM11E and RM11E?
What is the difference between TM11E and TM33E?
Does the TM11E support extended battery runtime?
Can TM11E units be paralleled for redundancy?
What input voltage range does the TM11E accept?
How is the TM11E monitored remotely?
Is the TM11E pure sine wave, and what standards does it meet?
Specify Your TM11E Tower UPS
with the Right Runtime
Send us your connected load, required backup time, site voltage and installation constraints. ATENCO will recommend the suitable TM11E 1–10 kVA model, battery configuration and compatible monitoring or maintenance-bypass options for your project. Quotations are supplied through ATENCO’s authorized distributor network.